# 5 Application in Actual Work

- [5.1 Loading Container](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container.md)
- [5.1.1 How to simulate carton expansion and manual interval](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.1-carton-expansion-and-manual-interval.md)
- [5.1.2 How to elude corner castings](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.2-elude-corner-castings.md)
- [5.1.3 How to make LoadMaster intelligently choose the most suitable container](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.3-choose-the-most-suitable-container.md)
- [5.1.4 How to calculate whether a container (or vehicle) can hold a certain amount of goods](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.4-hold-a-certain-amount-of-goods.md)
- [5.1.5 How to calculate the maximum amount of single cargo can be loaded in a container](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.5-maximum-amount-of-single-cargo.md)
- [5.1.6 How to consider the load-bearing capacity of different cargoes](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.5-load-bearing-capacity-of-different-cargoes.md)
- [5.1.7 How to realize the loading with a sequential order](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.7-loading-with-a-sequential-order.md)
- [5.1.8 How to realize placing the same goods adjacent to each other](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.8-placing-the-same-goods-adjacent.md)
- [5.1.9 How to realize the loading with a certain proportion of cargoes in a set](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.9-loading-with-a-certain-proportion.md)
- [5.1.10 How to stuff cargo in the remaining space](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.10-stuff-cargo-in-the-remaining-space.md)
- [5.1.11 How to limit the max stack when different kinds of goods are stacked on top of each other](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.11-limit-the-max-stack-different-goods.md)
- [5.1.12 How to load goods according to the order and quantity of the container](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.12-order-and-quantity-of-the-container.md)
- [5.1.13 How to make "stand" and "stand & rotate" are the priority load orientations.](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.13-stand-and-stand-and-rotate-priority.md)
- [5.1.14 How to realize the unitload will be generated with priority](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.14-unitload-priority.md)
- [5.1.15 How to lock certain containers and recalculate the remaining containers](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.15-lock-and-recalculate.md)
- [5.1.16 How to bottom spread cargoes when the container is not full](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.16-spread-cargoes.md)
- [5.1.17 How to use \[manual edit\] to adjust the center of gravity to ensure the balance of container](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.17-manual-edit-center-of-gravity.md)
- [5.1.18 How to realize only goods with the same length and width can stack on each other](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.18-goods-same-length-and-width.md)
- [5.1.19 How to realize the requirement of choosing the container with the highest loading rate](https://doc.loadmaster.biz/5-application-in-actual-work/5.1-loading-container/5.1.19-container-highest-loading-rate.md)
- [5.2 Loading Pallet](https://doc.loadmaster.biz/5-application-in-actual-work/5.2-loading-pallet.md)
- [5.2.1 Calculate how to pallet cargoes](https://doc.loadmaster.biz/5-application-in-actual-work/5.2-loading-pallet/5.2.1-how-to-pallet-cargoes.md)
- [5.2.2 How to define that goods of different orders cannot be mixed](https://doc.loadmaster.biz/5-application-in-actual-work/5.2-loading-pallet/5.2.2-different-orders-cannot-be-mixed.md)
- [5.2.3 How to define the goods in same order not to split into multiple containers as far as possible](https://doc.loadmaster.biz/5-application-in-actual-work/5.2-loading-pallet/5.2.3-same-order-not-to-split.md)
- [5.3 2-Steps Loading](https://doc.loadmaster.biz/5-application-in-actual-work/5.3-2-steps-loading.md)
- [5.3.1 How to pallet the goods first and then load it into the container](https://doc.loadmaster.biz/5-application-in-actual-work/5.3-2-steps-loading/5.3.1-pallet-first-and-then-container.md)
- [5.3.2 How to generate high and low pallets to make full use of the space in 2-steps loading](https://doc.loadmaster.biz/5-application-in-actual-work/5.3-2-steps-loading/5.3.2-high-and-low-pallets.md)
- [5.3.3 How to generate unit-load pallets as much as possible](https://doc.loadmaster.biz/5-application-in-actual-work/5.3-2-steps-loading/5.3.3-unit-load-pallets.md)
- [5.3.4 How to define whether to allow the remaining space to be filled with bulk cargo](https://doc.loadmaster.biz/5-application-in-actual-work/5.3-2-steps-loading/5.3.4-remaining-space-bulk-cargo.md)
- [5.3.5 How to specify the intermediate packaging container](https://doc.loadmaster.biz/5-application-in-actual-work/5.3-2-steps-loading/5.3.5-intermediate-packaging-container.md)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://doc.loadmaster.biz/5-application-in-actual-work.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.